EVOLUTION "EVO" HELMETS
AVI-HPH KEVLAR HELMET
AVIATION HELMET REPAIR
DAVID CLARK HELMETS
CEP & CME KITS
LIP & FINGER LIGHTS
ANTI EXPOSURE SUITS
HELICOPTER LZ LIGHT KITS
HEEDS III & S.E.A.
PLB LOCATOR BEACONS
SPOT - SAT TRACKER
SURVIVAL TOOLS / KNIVES
AO SUN GLASSES
RAFTS & MARINE
LIFE RAFT RENTALS
LIFE RAFTS - AVIATION
LIFE RAFTS - MARINE
ANTI EXPOSURE SUITS
SEA DYE MARKER
QUICK THROW BAGS
FIRST AID KITS
RATIONS / WATER
FLARES - MARINE
LIFE VESTS - MARINE
NOMEX FLIGHT SUITS
PELICAN GUN CASES
WATER RESCUE KITS
FIRST AID KITS - NAR
PELICAN HARDIGG CASES
BINOCULARS - STEINER
MEALS READY TO EAT MRE'S
WINCH GEAR - BASKETS
HOIST SAFETY VESTS
PORTABLE LZ KITS
BrightlLine B0 SLIM Pilot Bag
Bright Line B2 Compute Pilot Bag
BrightlLine B0 • SLIM Pilot Bag
Write a Review
Add to Wish List
Put me on the Waiting List
• DESCRIPTION •
The B-zero SLIM is obviously the thinnest possible FLEX SYSTEM configuration. We sometimes call this bag "The iPad bag" because it works so well as an ultra-thin computing and personal bag - a "man purse" if you will.
The B-zero is simply the POCKET CAP FRONT and the FLAT CAP REAR modules zipped together. It has no definable interior storage dimensions since it is just two End Caps put right against each other, but the flexible nature of the parts allows one-half inch to three-quarters inch of flat items to fit inside between the modules.
The iPad (or other tablet) is most commonly stored inside the long slip pocket on the back of the FLAT CAP REAR, and then the space between the two modules has the capacity to store a 13" Ultrabook laptop or a thin stack of Manila folders for documents, or a magazine or two. So it is possible to carry a thin laptop AND an iPad with this configuration.
The B-Zero SLIM also serves as the obvious starting point for all other configurations. You can add and remove space as necessary just by adding different Center Sections.
It is possible to carry the B-Zero using both a handle and a SHOULDER STRAP because of a clever (and Patent Pending) clip called the "D3 CLIP". A pair of D3 CLIPS attach to two loops on the top (or another set of loops on the side) of the bag. And then the SLIM HANDLE and SHOULDER STRAP attach to those D3 CLIPS. See the Gallery for photos.
The POCKET CAP FRONT acts like the "hub" for your entire FLEX System. No matter which configuration you carry you'll be attaching the POCKET CAP FRONT to one end of your bag. And it's the "hub" because it holds all the important small stuff and personal stuff that you want with you no matter what. If you change configurations, you'll always move the POCKET CAP FRONT to the new configuration which means you'll always have all this key stuff with you, without any repacking or reloading.
The POCKET CAP FRONT module offers a variety of pockets organized into three "main" pockets and six "secondary" pockets for a total of nine small pockets on the front panel. In these nine pockets you'll store all the cords, cables, chargers, batteries, stylus, memory cards etc, for all your electronic gear. All these important items will finally be separated and organized like you've always wanted. In addition, you'll have room for your flight timer, fuel testers, E6B, flashlights, compact portable GPS, etc. Not to mention space for your wallet, keys, cellphone, business cards, multi-tool, glasses, pens, markers, and things like Ibuprofen, Chapstick, bandaids, etc, and even your digital camera. There is also a flat half-height slip pocket on the inner surface of the module where you can stow an important document or two like a copy of your medical or your passport.
The FLAT CAP REAR module offers two flat pockets on the outside, and one flat half-height slip pocket on the inner surface of the module. The primary outer pocket is accessed from the top and has a cover flap that is secured with Velcro. This where you'll likely store your iPad (as long as it's not in a thick case), or a manilla folder or two for some documents, or a magazine. There is a second flat half-height panel on the outside of the main panel that has a zipper across the very bottom. If the zipper is closed then this half-height panel acts like a pocket. If the zipper is open then the opening at the bottom allows the telescoping tubes of a suitcase or folding cart to pass through and the panel serves to secure your bag to those tubes (especially when this FLAT CAP REAR is attached to other modules to form bigger bags like the B2 COMPUTE, B4 SWIFT or the B7 FLIGHT).
The B0 SLIM comes with a SHOULDER STRAP, and also a SLIM HANDLE KIT. (Note that the B0 does not include a MAIN HANDLE - it isn't necessary.)
The SLIM HANDLE KIT consists of a SLIM HANDLE, two ADAPTER LOOPS, and four D3 CLIPS. This SLIM HANDLE KIT will be necessary in order to carry the B0 SLIM since there are no 1-inch quick-release clips for the Main Handle or SHOULDER STRAP on the B0. Follow the included instructions and you will be able to install two D3 CLIPS to allow the use of BOTH the SLIM HANDLE and the SHOULDER STRAP. (The remaining two D3 CLIPS are spares.)
Questions about this item? Ask here.
POCKET CAP FRONT
FLAT CAP REAR
Slim Handle Kit
Adapter Loop (qty 2)
D3 Clip (qty 4)
NOTE: Does not include a Main Handle (not necessary)
Interior: 13.5" tall, 10.0" wide, zero inches deep. (34cm x 25cm x 0.0cm)
Exterior: 14.0" tall, 10.5" wide, 1.75" deep. (36cm x 27cm x 4.5cm)
Keep in mind that the bag material is flexible, so the size of the interior storage may be able to "stretch" out just a bit in one direction or another. Also keep in mind that over-stuffing your bag can cause seam or material failure, and this is not covered by warranty.
1.75 lbs. (0.8 kg)
TOTAL NUMBER OF POCKETS AND STORAGE COMPARTMENTS:
TOTAL NUMBER OF AVAILABLE FLEX SYSTEM SIDE POCKETS:
Zero (There are no FLEX-mount side pocket stations)
TOTAL VOLUMETRIC STORAGE:
Zero (except for the space inside the 3 small front-panel pockets. And, of course, the narrow space between the two modules can accommodate some small amount of flat stuff)
MODULAR EXPANSION CAPABILITY:
Unlimited. You can add any of the other FLEX System modules to this bag, in ay order, to make a bag as big or as small as you need on any given day.
The top front pocket cover of the POCKET CAP FRONT module can be removed to make it easy to add custom embroidery. Use your own embroidery person, or email us for details about our service.
BrightLine B4 • SWIFT Pilot Bag
BrightLine B7 • FLIGHT Pilot Bag
BrightLine B2 • COMPUTE Pilot Bag
BrightLine B18 • HANGAR Pilot Bag
Brightline Folding Cart
Recently Viewed Items
Turn History Off